Dataset Search

This dataset is the result of three crawls of the web performed in May 2018. The data contains raw crawl data and instrumentation captured by OpenWPM-Mobile, as well as analysis that identifies which scripts access mobile sensors, which ones perform some of browser fingerprinting, as well as clustering of scripts based on their intended use. The dataset is described in the included README.md file; more details about the methodology can be found in our ACM CCS'18 paper: Anupam Das, Gunes Acar, Nikita Borisov, Amogh Pradeep. The Web's Sixth Sense: A Study of Scripts Accessing Smartphone Sensors. In Proceedings of the 25th ACM Conference on Computer and Communications Security (CCS), Toronto, Canada, October 15–19, 2018. (Forthcoming)

In the repository are example scripts that perform uncertainty injection and propagation to flux balance analysis with outputs for a small sample size (for demonstration purpose only). For proper analysis, user should download the scripts and run for a large sample size (e.g., 10,000 samples). If you use the scripts, please cite the following Metabolic Engineering article: “Quantifying the propagation of parametric uncertainty on flux balance analysis” (https://doi.org/10.1016/j.ymben.2021.10.012) There are two subdirectories: /uncFBA/uncBiom: injection of normally distributed noise to biomass precursor coeffcients and ATP maintenance (growth-associated ATP maintenance (GAM) and non-growth associated ATP maintenance (NGAM)) /uncFBA/uncRHS: departure from steady-state by adding noise drawn from normal distribution to the RHS terms of mass balance constraints

This dataset contains best estimates of the particle size distribution and measurements of the radar reflectivity factor and total water content for instances where ground-based radar and airborne microphysical observations were considered collocated with each other.

Compositional characterization of biomass is vital for the biofuel industry. Traditional wet chemistry-based methods for analyzing biomass composition are laborious, time-consuming, and require extensive use of chemical reagents as well as highly skilled personnel. In this study, near-infrared (NIR) spectroscopy was used to quickly assess the composition of above-ground vegetative biomass from 113 diverse, photoperiod-sensitive, biomass-type sorghum (Sorghum bicolor) accessions cultivated under field conditions in Central Illinois. Biomass samples were analyzed using NIR spectra collected in the spectral range of 867–2536 nm, with their chemical compositions determined following the National Renewable Energy Laboratory (NREL) protocol. Advanced spectral pre-treatment and band selection techniques were utilized to develop calibration models using partial least squares regression (PLSR). The models’ effectiveness was assessed through cross-validation and independent data tests. The predictions for moisture, ash, extractives, glucan, xylan, acid-soluble lignin (ASL), acid-insoluble lignin (AIL), and total lignin were accurate and reliable, demonstrating the capability of NIR spectroscopy to provide rapid and precise characterization of sorghum biomass. The results demonstrated that NIR spectroscopy is an efficient tool for rapidly characterizing sorghum biomass, making it a sustainable option for screening desirable feedstock for biofuel or bioproduct production.

Oilcane is an engineered sugarcane with the ability to hyper-accumulate vegetative lipids. It is processed to obtain juice and bagasse as a potential substrate for the production of biofuels and biochemicals. The juice comprises solid particles that are separated as waste mud before the fermentation of the juice. In this study, the oilcane waste mud (OWM) generated from 1000 liters of oilcane juice was quantified and evaluated as a potential resource for recovering biobased waxes. Hexane and ethyl acetate were evaluated as two different solvents for extracting waxes from OWM followed by its purification using acetone. The extracted biobased wax samples were characterized for their chemical and thermal profiles which were then compared with commercial natural waxes. Detailed mass balance shows that 53.6 ± 2.6 kg (dry basis) of solid OWM gets generated upon processing 1000 L (~1068 kg) of oilcane juice. Hexane and ethyl acetate led to a crude wax yield of 25.6 ± 0.2% and 16.6 ± 0.4% (wt/wt, dry basis) respectively from OWM at the end of 8 h. The relative purification of the wax samples was reported in the range of 58%–65% (wt/wt). The purified OWM wax has a melting point of 74.7°C. The waste mud was valorized as a source of biobased waxes with characteristic chemical and thermal profiles comparable to commercial natural waxes (carnauba and beeswax). Considering the decline in the supply of petroleum wax in the future coupled with the switch to “greener” alternative products by consumers, OWM could be a valuable source of natural wax in the industrial sector reducing the dependence on petroleum waxes. Eventually, recovering biobased wax as a co-product from OWM would bring in an additional stream of revenue leading to the development of a zero-waste biorefinery based on bioenergy crops.

*Updates for this V3: added a few more records and rearranged the sequence of the tables in order to support our new paper "Evaluation of Indirect and Direct Scoring Methods to Relate Biochemical Soil Quality Indicators to Ecosystem Services" accepted by the Soil Science Society of America Journal. We summarize peer reviewed literature reporting associations between for three soil quality indicators (SQIs) (β-glucosidase (BG), fluorescein diacetate (FDA) hydrolysis, and permanganate oxidizable carbon (POXC)) and crop yield and greenhouse gas emissions. Peer-reviewed articles published between January of 1990 and May 2018 were searched using the Thomas Reuters Web of Science database (Thomas Reuters, Philadelphia, Pennsylvania) and Google Scholar to identify studies reporting results for: “β-glucosidase”, “permanganate oxidizable carbon”, “active carbon”, “readily oxidizable carbon”, or “fluorescein diacetate hydrolysis”, together with one or more of the following: “crop yield”, “productivity”, “greenhouse gas’, “CO2”, “CH4”, or “N2O”. Meta-data for records include the following descriptor variables and covariates useful for scoring function development: 1) identifying factors for the study site (location, duration of the experiment), 2) soil textural class, pH, and SOC, 3) depth of soil sampling, 4) units used in published works (i.e.: equivalent mass, concentration), 5) SQI abundances and measured ecosystem functions, and 6) summary statistics for correlation between SQIs and functions (yield and greenhouse gas emissions). *Note: Blank values in tables are considered unreported data.

Plant bioengineering is a time-consuming and labor-intensive process with no guarantee of achieving desired traits. Here, we present a fast, automated, scalable, high-throughput pipeline for plant bioengineering (FAST-PB) in maize (Zea mays) and Nicotiana benthamiana. FAST-PB enables genome editing and product characterization by integrating automated biofoundry engineering of callus and protoplast cells with single-cell matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). We first demonstrated that FAST-PB could streamline Golden Gate cloning, with the capacity to construct 96 vectors in parallel. Using FAST-PB in protoplasts, we found that PEG2050 increased transfection efficiency by over 45%. For proof-of-concept, we established a reporter-gene-free method for CRISPR editing and phenotyping via mutation of high chlorophyll fluorescence 136. We show that diverse lipids were enhanced up to 6-fold using CRISPR activation of lipid controlling genes. In callus cells, an automated transformation platform was employed to regenerate plants with enhanced lipid traits through introducing multigene cassettes. Lastly, FAST-PB enabled high-throughput single-cell lipid profiling by integrating MALDI-MS with the biofoundry, protoplast, and callus cells, differentiating engineered and unengineered cells using single-cell lipidomics. These innovations massively increase the throughput of synthetic biology, genome editing, and metabolic engineering and change what is possible using single-cell metabolomics in plants.

The nonconventional yeast Issatchenkia orientalis has emerged as a potential platform microorganism for production of organic acids due to its ability to grow robustly under highly acidic conditions. However, lack of efficient genetic tools remains a major bottleneck in metabolic engineering of this organism. Here we report that the autonomously replicating sequence (ARS) from Saccharomyces cerevisiae (ScARS) was functional for plasmid replication in I. orientalis, and the resulting episomal plasmid enabled efficient genome editing by the CRISPR/Cas9 system. The optimized CRISPR/Cas9-based system employed a fusion RPR1′-tRNA promoter for single guide RNA (sgRNA) expression and could attain greater than 97% gene disruption efficiency for various gene targets. Additionally, we demonstrated multiplexed gene deletion with disruption efficiencies of 90% and 47% for double gene and triple gene knockouts, respectively. This genome editing tool can be used for rapid strain development and metabolic engineering of this organism for production of biofuels and chemicals.

12CO and 13CO emission maps of the 30 Doradus molecular cloud in the Large Magellanic Cloud, obtained with the Atacama Large Millimeter/submillimeter Array (ALMA) during Cycle 7. See the associated article in the Astrophysical Journal, and README file, for details. Please cite the article if you use these data.

Rhodotorula toruloides is a non-model, oleaginous yeast uniquely suited to produce acetyl-CoA-derived chemicals. However, the lack of well-characterized genomic integration sites has impeded the metabolic engineering of this organism. Here we report a set of computationally predicted and experimentally validated chromosomal integration sites in R. toruloides. We first implemented an in silico platform by integrating essential gene information and transcriptomic data to identify candidate sites that meet stringent criteria. We then conducted a full experimental characterization of these sites, assessing integration efficiency, gene expression levels, impact on cell growth, and long-term expression stability. Among the identified sites, 12 exhibited integration efficiencies of 50% or higher, making them sufficient for most metabolic engineering applications. Using selected high-efficiency sites, we achieved simultaneous double and triple integrations and efficiently integrated long functional pathways (up to 14.7 kb). Additionally, we developed a new inducible marker recycling system that allows multiple rounds of integration at our characterized sites. We validated this system by performing five sequential rounds of GFP integration and three sequential rounds of MaFAR integration for fatty alcohol production, demonstrating, for the first time, precise gene copy number tuning in R. toruloides. These characterized integration sites should significantly advance metabolic engineering efforts and future genetic tool development in R. toruloides.

This dataset was created based on the publicly available microdata from PNS-2019, a national health survey conducted by the Instituto Brasileiro de Geografia e Estatistica (IBGE, Brazilian Institute of Geography and Statistics). IBGE is a federal agency responsible for the official collection of statistical information in Brazil – essentially, the Brazilian census bureau. Data on selected variables focusing on biopsychosocial domains related to pain prevalence, limitations and treatment are available. The Fundação Instituto Oswaldo Cruz has detailed information about the PNS, including questionnaires, survey design, and datasets (www.pns.fiocruz.br). The microdata can be found on the IBGE website (https://www.ibge.gov.br/estatisticas/downloads-estatisticas.html?caminho=PNS/2019/Microdados/Dados).

- The aim of this research was to evaluate the novel dietary fiber source, miscanthus grass, in comparison to traditional fiber sources, and their effects on the microbiota of healthy adult cats. Four dietary treatments, cellulose (CO), miscanthus grass fiber (MF), a blend of miscanthus fiber and tomato pomace (MF+TP), or beet pulp (BP) were evaluated.<br /><br />- The study was conducted using a completely randomized design with twenty-eight neutered adult, domesticated shorthair cats (19 females and 9 males, mean age 2.2 ± 0.03 yr; mean body weight 4.6 ± 0.7 kg, mean body condition score 5.6 ± 0.6). Total DNA from fresh fecal samples was extracted using Mo-Bio PowerSoil kits (MO BIO Laboratories, Inc., Carlsbad, CA). Amplification of the 292 bp-fragment of V4 region from the 16S rRNA gene was completed using a Fluidigm Access Array (Fluidigm Corporation, South San Francisco, CA). Paired-end Illumina sequencing was performed on a MiSeq using v3 reagents (Illumina Inc., San Diego, CA) at the Roy J. Carver Biotechnology Center at the University of Illinois. <br />- Filenames are composed of animal name identifier, diet (BP= beet pulp; CO= cellulose; MF= miscanthus grass fiber; TP= blend of miscanthus fiber and tomato pomace).

This dataset includes mass spectrometry, library screening, and gas chromatography data used for creating a high-throughput screening in metabolic engineering.

The materials used to provide Continuing Medical Education on ticks and tick-borne diseases in Illinois on February 1, 2023 at Carle Hospital, along with the pre- and post-quiz and deidentified data of the quiz takers. Files: "Ticks and Tick-borne Diseases of Illinois_Final_w_speaker_notes.pptx": Presentation slides used for CME course, with notes to indicate verbal commentary "CME assessment_final.docx": Pre- and post-CME quiz questions and answers, annotated to indicate correct answers and reasoning for incorrect answers "CME_prequiz_data_for_sharing.csv": De-identified data from pre-CME quiz "CME_postquiz_data_for_sharing.csv": De-identified data from post-CME quiz, including demographics "DataCleaning_forSharing.R": R file used to clean the raw data and calculate the scores "ReadMe.txt":

Various works have quantitatively characterized the effects of environmental and management factors on Miscanthus x giganteus Greef et Deu (mxg) yield and, therefore, anticipated land requirement per unit production. However, little work has addressed the effects of cutting height, which may significantly contribute to the difference between the standing aboveground biomass at harvest (i.e., biological yield) and harvested yield. This study quantitatively characterized the effect of cutting height using a replicated nitrogen trial of a 5-year-old mxg stand in southeast Iowa and related this information to observations of cutting height in nearby commercial fields. Nitrogen fertilizer did not significantly change the relationship of the stem segment mass to length, and overall, a 1-cm stem segment contributes 0.5% of the total stem biomass within the bottom 44 cm of the stem. This results in an average harvest loss of 15% of the aboveground standing biomass when cutting at 30 cm, typically seen in commercial mxg fields in eastern Iowa. Cutting height should be considered when accurately predicting commercial mxg harvest yields and changes in soil organic carbon in a commercial mxg agroecosystem.

This dataset contains the values directly shown in the figures of the article "The impact of aerosol mixing state on immersion freezing: Insights from classical nucleation theory and particle-resolved simulations". This article is in preparation for submission to the journal Atmospheric Chemistry and Physics. The dataset consists of 15 NetCDF files processed from the raw output of the PartMC model. It does not include the theoretical values of frozen fraction, which can be computed using the equations provided in the paper.

A wide range of inorganic and organic chemicals are used during the pretreatment and enzymatic hydrolysis of lignocellulosic biomass to produce biofuels. Developing an industrially relevant 2G biorefinery process using such chemicals is challenging and requires more unit operations for downstream processing. A sustainable process has been developed to achieve industrially relevant titers of bioethanol with significant ethanol yield. The pretreatment of sorghum biomass was performed by a continuous pilot-scale hydrothermal reactor followed by disk milling. Enzymatic hydrolysis was performed without washing the pretreated biomass. Moreover, citrate buffer strength was reduced to 100-fold (50 mM to 0.5 mM) during the enzymatic hydrolysis. Enzymatic hydrolysis at 0.5 mM citrate buffer strength showed that significant sugar concentrations of 222 ± 2.3 to 241 ± 2.3 g/L (glucose + xylose) were attained at higher solids loadings of 50 to 60% (w/v). Furthermore, hydrolysates were fermented to produce bioethanol using two different xylose-fermenting Saccharomyces cerevisiae strains and a co-culture of xylose-fermenting and non-GMO yeast cultures. Bioethanol titer of 81.7 g/L was achieved with an ethanol yield of 0.48 gp/gs. Additionally, lipids were produced using the oleaginous yeast Rhodosporidium toruloides, yielding 13.2 g/L lipids with cellular lipid accumulation of 38.5% w/w from 100 g/L of sugar concentration. In summary, reducing the strength of the citrate buffer during enzymatic hydrolysis and omitting inorganic chemicals from the pretreatment process enhances the fermentability of hydrolysates and can also reduce operating costs.

Information to characterize the solar-induced chlorophyll fluorescence (SIF)-gross primary production (GPP) relationship in C4 cropping systems remains limited. The annual C4 crop corn and perennial C4 crop miscanthus differ in phenology, canopy structure and leaf physiology. Investigating the SIF-GPP relationships in these species could deepen our understanding of SIF-GPP relationships within C4 crops. Using in situ canopy SIF and GPP measurements for both species along with leaf-level measurements, we found considerable differences in the SIF-GPP relationships between corn and miscanthus, with a stronger SIF-GPP relationship and higher slope of SIF-GPP observed in corn compared to miscanthus. These differences were mainly caused by leaf physiology. For miscanthus, high non-photochemical quenching (NPQ) under high light, temperature and water vapor deficit (VPD) conditions caused a large decline of fluorescence yield (ΦF), which further led to a SIF midday depression and weakened the SIF-GPP relationship. The larger slope in corn than miscanthus was mainly due to its higher GPP in mid-summer, largely attributed to the higher leaf photosynthesis and less NPQ. Our results demonstrated variation of the SIF-GPP relationship within C4 crops and highlighted the importance of leaf physiology in determining canopy SIF behaviors and SIF-GPP relationships.

Overwintering ability is an important selection criterion for Miscanthus breeding in temperate regions. Insufficient overwintering ability of the currently leading Miscanthus biomass cultivar, M. ×giganteus (M×g) ‘1993–1780′, in regions where average annual minimum temperatures are −26.1°C (USDA hardiness zone 5) or lower poses a pressing need to develop new cultivars with superior cold tolerance. To facilitate breeding of Miscanthus, this study characterized phenotypic and genetic variation of overwintering ability in an M. sinensis germplasm panel consisting of 564 accessions, evaluated in field trials at three locations in North America and two in Asia. Genome‐wide association (GWA) and genomic prediction analyses were performed. The Korea/N China M. sinensis genetic group is a valuable gene pool for cold tolerance. The Yangtze‐Qinling, Southern Japan, and Northern Japan genetic groups were also potential sources of cold tolerance. A total of 73 marker–trait associations were detected for overwintering ability. Estimated breeding value for overwintering ability based on these 73 markers could explain 55% of the variation for first winter overwintering ability among M. sinensis. Average genomic prediction ability for overwintering ability across 50 fivefold cross‐validations was high (~0.73) after accounting for population structure. Common genomic regions for overwintering ability were detected by GWA analyses and a previous parallel QTL mapping study using three interconnected biparental F1 populations. One QTL on Miscanthus LG 8 encompassed five GWA hits and a known cold‐responsive gene, COR47. The other overwintering ability QTL on Miscanthus LG 11 contained two GWA hits and three known cold stress‐related genes, carboxylesterase 13 (CEX13), WRKY2 transcription factor, and cold shock domain (CSDP1). Miscanthus accessions collected from high latitude locations with cold winters had higher rates of overwintering, and more alleles for overwintering, than accessions collected from southern locations with mild winters.

- The objective of this study was to evaluate macronutrient apparent total tract digestibility (ATTD), gastrointestinal tolerance, and fermentative end-products in extruded, canine diets. <br />- Five diets were formulated to be isocaloric and isonitrogenous with either garbanzo beans (GBD), green lentils (GLD), peanut flour (PFD), dried yeast (DYD), or poultry by-product meal (CON) as the primary protein sources. Ten adult, intact, female beagles (mean age: 4.2 ± 1.1 yr, mean 28 weight: 11.9 ± 1.3 kg) were used in a replicated, 5x5 Latin square design with 14 d periods. Total DNA from fresh fecal samples was extracted using Mo-Bio PowerSoil kits (MO BIO Laboratories, Inc., Carlsbad, CA). Amplification of the 292 bp-fragment of V4 region from the 16S rRNA gene was completed using a Fluidigm Access Array (Fluidigm Corporation, South San Francisco, CA). Paired-end Illumina sequencing was performed on a MiSeq using v3 reagents (Illumina Inc., San Diego, CA) at the Roy J. Carver Biotechnology Center at the University of Illinois. <br />- Filenames are composed of animal name identifier, diet (CON=control; DY= dried yeast; GB= garbanzo beans; GL= green lentils; PF= peanut flour) and period replicate number (P1, P2, P3, P4, and P5).

The text file contains the original aligned DNA nucleotide sequence data used in the phylogenetic analyses of Feng et al. (in review), comprising the 3 protein-coding genes (histone H3, cytochrome oxidase I and 2) and 2 ribosomal genes (28S D8 and 16S). The text file is marked up according to the standard NEXUS format commonly used by various phylogenetic analysis software packages. The file will be parsed automatically by a variety of programs that recognize NEXUS as a standard bioinformatics file format. The first six lines of the file identify the file as NEXUS, indicate that the file contains data for 257 taxa (species) and 2995 characters (nucleotide positions), indicate that the characters are DNA sequence, that gaps inserted into the DNA sequence alignment are indicated by a dash, and that missing data are indicated by a question mark. The remainder of the file contains the aligned nucleotide sequence data for the five genes. Data partitions, representing the individual genes and different codon positions of the protein-coding genes, are indicated by the lines beginning "charset" near the end of the file. Two supplementary tables in the provided PDF file provide additional information on the species in the dataset, including the GenBank accession numbers for the sequence data (Table S1) and the DNA substitution models used for each of the data partitions used for analyses in the phylogenetic analysis program IQ-Tree (version 1.6.8) (Table S3), as described in the Methods section of the paper. The supplemental tables will also be linked to the article upon publication at the journal website.

In a novel approach, metabolically engineered sugarcane “Oilcane” has been investigated for fractionation of lipid and cellulose-rich pulp, using certain Natural deep eutectic solvents (NADES). The exploration of eco-friendly solvents are at the forefront of harnessing the biofuel potential of modern bioenergy crops. For this, six combinations of NADES were prepared using choline chloride (ChCl) as HBA and lactic acid (LA), oxalic acid (OA) and glycerol (Gly) as HBD and were further explored for pretreatment of oilcane bagasse in a molar ratio of 1:1 and 1:2. The impact of NADES ratio, biomass loading (10–50%), residence time (1–2 h), and temperature (90–140 °C) were evaluated for delignification, lipid content, sugar release after enzymatic hydrolysis. The finding demonstrated that under the optimal condition of ChCl: LA (1:2 molar ratio), 140 °C with 2 h retention time, the lipid content in the pre-treated substrate was increased to 2.5-fold (∼8% w/w) and > 80% glucose yield was achieved after 72 h of hydrolysis of pre-treated bagasse. High solid loading (∼50%) during pretreatment resulted in a similar glucose yield. Furthermore, recycling studies demonstrated that nearly 95 to 98% NADES could be recycled after each pretreatment for up to five consecutive cycles without any significant loss in chemical structure as confirmed by 1H NMR and FT IR. FT IR and XRD analyses of native and pre-treated biomass were performed to visualize the morphological changes during NADES pretreatment and their impact on sugar yield. The findings of the study may be used to establish NADES-based biorefinery for the valorization of lipids, and carbohydrates for fuels and chemicals production.

Xylan accounts for up to 40% of the structural carbohydrates in lignocellulosic feedstocks. Along with xylan, acetic acid in sources of hemicellulose can be recovered and marketed as a commodity chemical. Through vibrant bioprocessing innovations, converting xylose and acetic acid into high-value bioproducts via microbial cultures improves the feasibility of lignocellulosic biorefineries. Enzymatic hydrolysis using xylanase supplemented with acetylxylan esterase (AXE) was applied to prepare xylose-acetic acid enriched hydrolysates from bioenergy sorghum, oilcane, or energycane using sequential hydrothermal-mechanical pretreatment. Various biomass solids contents (15 to 25%, w/v) and xylanase loadings (140 to 280 FXU/g biomass) were tested to maximize xylose and acetic acid titers. The xylose and acetic acid yields were significantly improved by supplementing with AXE. The optimal yields of xylose and acetic acid were 92.29% and 62.26% obtained from hydrolyzing energycane and oilcane at 25% and 15% w/v biomass solids using 280 FXU xylanase/g biomass and AXE, respectively.

These datasets are for the four-dimensional scanning transmission electron microscopy (4D-STEM) and electron energy loss spectroscopy (EELS) experiments for cathode nanoparticles at different cutoff voltages and in different electrolytes. The raw 4D-STEM experiment datasets were collected by TEM image & analysis software (FEI) and were saved as SER files. The raw 4D-STEM datasets of SER files can be opened and viewed in MATLAB using our analysis software package of imToolBox available at <a href="https://github.com/flysteven/imToolBox">https://github.com/flysteven/imToolBox</a>. The raw EELS datasets were collected by DigitalMicrograph software and were saved as DM4 files. The raw EELS datasets can be opened and viewed in DigitalMicrograph software or using our analysis codes available at <a href="https://github.com/chenlabUIUC/OrientedPhaseDomain">https://github.com/chenlabUIUC/OrientedPhaseDomain</a>. All the datasets are from the work "Formation and impact of nanoscopic oriented phase domains in electrochemical crystalline electrodes" (2022). The 4D-STEM experiment data include four example datasets for cathode nanoparticles collected at different cutoff voltages and in different electrolytes as described below. Each dataset contains a stack of diffraction patterns collected at different probe positions scanned across the cathode nanoparticle. 1. Pristine cathode particle: "Pristine particle 4D-STEM.ser" 2. Cathode particle at the cutoff voltage of 0.09V during discharge at C/10 in the aqueous electrolyte: "Intermediate cutoff0_09V discharge (aqueous) 4D-STEM.ser" 3. Fully discharged cathode particle at C/10 in the aqueous electrolyte: "Fully discharged particle 4D-STEM.ser" 4. Fully discharged cathode particle at C/10 in the dry organic electrolyte: "Fully discharge particle (dry organic electrolyte).ser" The EELS experiment data includes three example datasets for cathode nanoparticles collected at different cutoff voltages during discharge in the aqueous electrolyte (in "EELS datasets.zip") as described below. Each EELS dataset contains the zero-loss and core-loss EELS spectra collected at different probe positions scanned across the cathode nanoparticle. 1. Pristine cathode particle: "Pristine particle EELS.zip" 2. Cathode particle at the cutoff voltage of 0.09V during discharge at C/10 in the aqueous electrolyte: "intermediate discharge (aqueous) EELS.zip" 3. Fully discharged cathode particle at C/10 in the aqueous electrolyte: "fully discharge (aqueous) EELS.zip" The details of the software package and codes that can be used to analyze the 4D-STEM datasets and EELS datasets are available at: https://github.com/chenlabUIUC/OrientedPhaseDomain. Once our paper is formally published, we will update the relationship of these datasets with our paper.

The nonconventional yeast Issatchenkia orientalis can grow under highly acidic conditions and has been explored for production of various organic acids. However, its broader application is hampered by the lack of efficient genetic tools to enable sophisticated metabolic manipulations. We recently constructed an episomal plasmid based on the autonomously replicating sequence (ARS) from Saccharomyces cerevisiae (ScARS) in I. orientalis and developed a CRISPR/Cas9 system for multiplexed gene deletions. Here we report three additional genetic tools including: (1) identification of a 0.8 kb centromere-like (CEN-L) sequence from the I. orientalis genome by using bioinformatics and functional screening; (2) discovery and characterization of a set of constitutive promoters and terminators under different culture conditions by using RNA-Seq analysis and a fluorescent reporter; and (3) development of a rapid and efficient in vivo DNA assembly method in I. orientalis, which exhibited ~100% fidelity when assembling a 7 kb-plasmid from seven DNA fragments ranging from 0.7 kb to 1.7 kb. As proof of concept, we used these genetic tools to rapidly construct a functional xylose utilization pathway in I. orientalis.