Dataset Search

The lack of farmers’ willingness to grow perennial bioenergy crops (PBCs) presents a critical barrier to the emergence of cellulosic biofuel production. The willingness relies on a complex network of economic, environmental, and social drivers, among which the influence of social factors (e.g., the influence of neighborhood, community, and communication) is less understood. This study addresses this knowledge gap via a survey analysis of midwestern farmers. The survey data are analyzed through ordinary least square regression and structural equation model, which together investigate the individual and interactive impacts of multiple factors on farmers’ decisions to adopt PBCs. Based on a farm-scale analysis, six statistically significant predictors of farmer willingness to grow PBCs are identified: perception of PBCs’ environment benefits, education level, willingness to take risks, familiarity with PBCs, portion of peers already growing PBCs, and support of biorefineries locating in the local community. Among these, the latter three predictors are social support variables. It is found that familiarity with the crops is the most significant predictor of willingness; familiarity is also an important intermediate variable that mediates the influence of many other predictors. In addition, peer adoption can both directly and indirectly affect willingness via its influence on familiarity. These findings suggest that it is a pressing need to improve farmers’ knowledge of PBCs to promote the adoption of such crops.

The selection of pretreatment methods is critical to achieving high product yields during bioconversion of lignocellulosic biomass. Hydrothermal, soaking-in-aqueous ammonia, and ionic liquid pretreatment methods are viable candidates for minimizing sugar decomposition, permitting the effective hydrolysis of structural carbohydrates, and producing a fermentable substrate suitable for achieving industrial ethanol titers and yields. In this study, the effect of these three pretreatment methods on non-modified sugarcane cultivar CP88-1762 and two transgenic lipid-accumulating sugarcane lines, oilcane 1565 and oilcane 1566, were investigated and compared in terms of lipid recovery, sugar yield, and ethanol yields within the lignocellulosic biomass conversion pipeline. Fed-batch enzymatic hydrolysis at high solid loading yielded hydrolysates capable of supporting industrial bioethanol titers across all conditions. The highest sugar yields were obtained on ammonia-pretreated biomass hydrolysate (253.73 g L−1), followed by hydrothermally pretreated hydrolysate (213.10 g L−1) and ionic liquid-pretreated hydrolysate (154.20 g L−1). Commercially viable ethanol titers of 100.62 g L−1, 64.47 g L−1, and 52.95 g L−1 were achieved from ammonia, hydrothermal, and ionic liquid pretreated hydrolysate with the corresponding ethanol productivities of 2.08 g L−1 h−1, 0.53 g L−1 h−1, and 0.36 g L−1 h−1. The lower acetic acid concentration in ammonia-pretreated hydrolysate may have enhanced its fermentability relative to the hydrothermal pretreatment condition, as indicated by the differences in ethanol titer and productivity. Lower sugar yields and ethanol productivities under the ionic liquid conditions likely resulted from the inhibitory effect of cholinium lysinate. Oilcane 1565 and oilcane 1566 bagasse accumulated over 16- and 3 times higher lipids than the non-modified sugarcane CP88-1762. The total fatty acid content in the oilcane samples was reduced in ammonia and ionic liquid-pretreated bagasse relative to the hydrothermal pretreatment condition. While all pretreatment techniques tested are industrially viable, the observed differences in titer, productivity, and lipid content indicate that careful selection and validation of upstream processing methods can contribute to improved economic and environmental outcomes.

Plant architecture influences the microenvironment throughout the canopy layer. Plants with a more erect leaf architecture allow for an increase in planting densities and allow more light to reach lower canopy leaves. This is predicted to increase crop carbon assimilation. Frictional resistance to wind reduces air movement in the lower canopy, resulting in higher humidity. By increasing the proportion of canopy photosynthesis in the more humid lower canopy, gains in the efficiency of water use might be expected, although this may be slightly offset by the more open erectophile form canopy. An anatomical feature in members of the Poaceae family that impacts leaf angle is the articulated junction of the sheath and blade, which also bares the ligule and auricles. Mutants, which lack ligules and auricles, show no articulation at this junction, resulting in leaves that are near vertical. In maize, these phenotypes termed liguleless result from null mutations of genes: ZmLG1 (Zm00001eb67740) and ZmLG2 (Zm00001eb147220). In sorghum, SbiRTx430.06G264300 (SbLG1) and SbiRTx430.03G392300 (SbLG2) are annotated as the respective maize homologues. A hair-pin element designed to down-regulate both SbLG1 and SbLG2 was introduced into the grain sorghum genotype RTx430. Derived transgenic events harbouring the hair-pin failed to develop ligules and displayed reduced leaf angles to the vertical, but less vertical than in null mutations. Under field settings, plots sown with these sorghum events having an erect architecture phenotype displayed an increase in photosynthesis in lower canopy levels, which led to increases in above-ground biomass and seed yield, without an increase in water use.

Base catalysts were studied for the dehydration of fatty alcohols to linear alpha olefins (LAOs). For the gas phase dehydration of 1-octanol to 1-octene, 15% Cs/SiO2 catalyst was 56% selective at 10% conversion. Diluting a feed of C8, C10, and C14 fatty alcohols to 50% in undecane increased the selectivity to alpha olefins to 77–99%. 15% Cs/SiO2 was further investigated for the gas phase dehydration of a 4.2 g L−1 mixed C8–C14 fatty alcohol in tridecane feed and showed linear alpha olefin selectivities of 78–100% at initial conversions of 51–91% with the conversion lowering to 32–77% over 30 h. Catalytic activity was totally regenerated through calcination. A feed of biologically derived alcohols was produced with E. coli strain CM24 transformed with three plasmids (pBTRCk–pVHb–maACR, pACYC–pVHb–seFadBA, pTRC99A–pVHb–tdTER–fdh) which yielded a 5.5 g L−1 of C8–C14 fatty alcohol in tridecane. This biologically-derived feed was successfully dehydrated to linear alpha olefins over 15% Cs/SiO2 at selectivities of 60–100% with initial conversions of 35–75% which decreased to 22–55% over 30 h. Techno-economic analysis (TEA) of the integrated process for fatty alcohol production and subsequent dehydration to alpha olefins was conducted across the potential fermentation TRY (titer, rate, yield) landscape. Baseline fermentation performance resulted in a minimum product selling price (MPSP) double the market price for LAOs due to low titers and high costs associated with managing water and tridecane solvent flows through the system. However, targeted improvements in fermentation performance (e.g., achieving 40 g L−1 titer, 0.5 g L−1 h−1 productivity, 80% theoretical yield) can enable financially viable production of biologically derived LAOs.

Rhodotorula toruloides is being developed for the use in industrial biotechnology processes because of its favorable physiology. This includes its ability to produce and store large amounts of lipids in the form of intracellular lipid bodies. Nineteen strains were characterized for mating type, ploidy, robustness for growth, and accumulation of lipids on inhibitory switchgrass hydrolysate (SGH). Mating type was determined using a novel polymerase chain reaction (PCR)-based assay, which was validated using the classical microscopic test. Three of the strains were heterozygous for mating type (A1/A2). Ploidy analysis revealed a complex pattern. Two strains were triploid, eight haploid, and eight either diploid or aneuploid. Two of the A1/A2 strains were compared to their parents for growth on 75%v/v concentrated SGH. The A1/A2 strains were much more robust than the parental strains, which either did not grow or had extended lag times. The entire set was evaluated in 60%v/v SGH batch cultures for growth kinetics and biomass and lipid production. Lipid titers were 2.33–9.40 g/L with a median of 6.12 g/L, excluding the two strains that did not grow. Lipid yields were 0.032–0.131 (g/g) and lipid contents were 13.5–53.7% (g/g). Four strains had significantly higher lipid yields and contents. One of these strains, which had among the highest lipid yield in this study (0.131 ± 0.007 g/g), has not been previously described in the literature.

Microbial cell factories have been extensively engineered to produce free fatty acids (FFAs) as key components of crucial nutrients, soaps, industrial chemicals, and fuels. However, our ability to control the composition of microbially synthesized FFAs is still limited, particularly, for producing medium‐chain fatty acids (MCFAs). This is mainly due to the lack of high‐throughput approaches for FFA analysis to engineer enzymes with desirable product specificity. Here we report a mass spectrometry (MS)‐based method for rapid profiling of MCFAs in Saccharomyces cerevisiae by using membrane lipids as a proxy. In particular, matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐ToF) MS was used to detect shorter acyl chain phosphatidylcholines from membrane lipids and a higher m/z peak ratio at 730 and 758 was used as an indication for improved MCFA production. This colony‐based method can be performed at a rate of ~2 s per sample, representing a substantial improvement over gas chromatography‐MS (typically >30 min per sample) as the gold standard method for FFA detection. To demonstrate the power of this method, we performed site‐saturation mutagenesis of the yeast fatty acid synthase and identified nine missense mutations that resulted in improved MCFA production relative to the wild‐type strain. Colony‐based MALDI‐ToF MS screening provides an effective approach for engineering microbial fatty acid compositions in a high‐throughput manner.

Engineering enzymes with novel reactivity and applying them in metabolic pathways to produce valuable products are quite challenging due to the intrinsic complexity of metabolic networks and the need for high in vivo catalytic efficiency. Triacetic acid lactone (TAL), naturally generated by 2-pyrone synthase (2PS), is a platform molecule that can be produced via microbial fermentation and further converted into value-added products. However, these conversions require extra synthetic steps under harsh conditions. We herein report a biocatalytic system for direct generation of TAL derivatives under mild conditions with controlled chemoselectivity by rationally engineering the 2PS active site and then rewiring the biocatalytic pathway in the metabolic network of E. coli to produce high-value products, such as kavalactone precursors, with yields up to 17 mg/L culture. Computer modeling indicates sterics and hydrogen-bond interactions play key roles in tuning the selectivity, efficiency, and yield.

Rubisco activase is an ATP-dependent chaperone that facilitates dissociation of inhibitory sugar phosphates from the catalytic sites of Rubisco during photosynthesis. In Arabidopsis, Rubisco activase is negatively regulated by dark-dependent phosphorylation of Thr78. The prevalence of Thr78 in Rubisco activase was investigated across sequences from 91 plant species, finding that 29 (∼32%) species shared a threonine in the same position. Analysis of seven C3 species with an antibody raised against a Thr78 phospho-peptide demonstrated that this position is phosphorylated in multiple genera. However, light-dependent dephosphorylation of Thr78 was observed only in Arabidopsis. Further, phosphorylation of Thr78 could not be detected in any of the four C4 grass species examined. The results suggest that despite conservation of Thr78 in Rubisco activase from a wide range of species, a regulatory role for phosphorylation at this site is more limited. This provides a case study for how variation in post-translational regulation can amplify functional divergence across the phylogeny of plants beyond what is explained by sequence variation in a metabolically important protein.

This dataset supports the analysis presented in the study on curbside electric vehicle (EV) charging infrastructure planning in San Francisco and the published paper titled "Urban electric vehicle infrastructure: Strategic planning for curbside charging." It includes spatial data layers and tabular data used to evaluate location suitability under multiple criteria, such as demand, accessibility, and environmental benefits. This dataset can be used to replicate the multi-criteria decision-making framework, perform additional spatial analyses, or inform policy decisions related to EV infrastructure siting in urban environments. The paper's DOI is https://doi.org/10.1016/j.jtrangeo.2025.104328.

Purpose-grown perennial herbaceous species are nonfood crops specifically cultivated for bioenergy production and have the potential to secure bioenergy feedstock resources while enhancing ecosystem services. This study assessed soil greenhouse gas emissions (CO2 and N2O), nitrate (NO3-N) leaching reduction potential, evapotranspiration (ET), and water-use efficiency (WUE) of bioenergy switchgrass (Panicum virgatum L.) in comparison to corn (Zea mays L.). The study was conducted on field-scale plots in Urbana, IL, during the 2020–2022 growing seasons. Switchgrass was established in 2020 and urea-fertilized at 56 kg N ha−1 year−1. Corn management followed best management practices for the US Midwest, including no-till and 202 kg N ha−1 year−1 fertilization, applied as urea–ammonium nitrate (32%). Our results showed lower direct N2O emissions in switchgrass compared to corn. Although soil CO2 emissions did not differ significantly during the establishment year, emissions in subsequent years were over 50% higher in switchgrass than in corn, likely due to increased belowground biomass, which was over five times higher in switchgrass. Nitrate-N leaching decreased as the switchgrass stand matured, reaching 80% lower than in corn by the third year. Differences in ET and WUE between corn and switchgrass were not significant; however, results indicate a trend toward reduced WUE in switchgrass under drought, driven by lower aboveground biomass production. Our study demonstrates that switchgrass can be implemented at a commercial scale without negatively impacting the hydrological cycle, while potentially reducing N losses through nitrate-N leaching and soil N2O emissions, and enhancing belowground C storage.

Bioenergy and bioproduct markets are expanding to meet demand for climate friendly goods and services. Perennial biomass crops are particularly well suited for this goal because of their high yields, low input requirements, and potential to increase soil carbon (C). However, it is unclear how much C is allocated into belowground pools by perennial bioenergy crops and whether the belowground benefits vary with nitrogen (N) fertilizer inputs. Using in situ 13C pulse-chase labeling, we tested whether the sterile perennial grass Miscanthus × giganteus (miscanthus) or annual maize transfers more photosynthetic C to belowground pools. The experiment took place at two sites in Central and Northwest (NW) Iowa with different management histories and two nitrogen (N) fertilizer rates (0 and 224 kg N ha-1 yr-1) to determine if the fate of plant-derived soil C depends on soil fertility and crop type (perennial or annual). Maize allocated a greater percentage of total new 13C to roots than miscanthus, but miscanthus had greater new 13C in total and belowground plant biomass. We found strong interactions between site and most soil measurements – including new 13C in mineral and particulate soil organic matter (SOM) pools –which appear to be driven by differences in historical fertilizer management. The NW Iowa site, with a history of manure inputs, had greater plant-available nutrients (phosphorus, potassium, and ammonium) in soils, and resulted in less 13C from miscanthus in SOM pools compared to maize (approximately 64% less in POM and 70% less in MAOM). In more nutrient-limited soils (Central site), miscanthus transferred 4.5 times more 13C than maize to the more stable mineral-associated SOM pool. Our results suggest that past management, including historical manure inputs that affect a site’s soil fertility, can influence the net C benefits of bioenergy crops. Dataset includes tables/figures from article and supplementary info. Dryad contains raw data.

Yarrowia lipolytica was found natively to produce erythritol, mannitol, and arabitol during growth on glucose, fructose, mannose, and glycerol. Osmotic stress is known to increase sugar alcohol production, and was found to significantly increase erythritol production during growth on glycerol. To better understand erythritol production from glycerol, since it was the most promising sugar alcohol, we measured the expression of key genes and intracellular metabolites. Osmotic stress increased the expression of several key genes in the glycerol catabolic pathway and the pentose phosphate pathway. Analysis of intracellular metabolites revealed that amino acids, sugar alcohols, and polyamines are produced at higher levels in response to osmotic stress. Heterologous overexpression of the sugar alcohol phosphatase increased erythritol production and glycerol utilization in Y. lipolytica. We further increased erythritol production by increasing the expression of native glycerol kinase (GK), and transketolase (TKL). These data show the growth and titers produced.

The dataset consists of: (1) The replication codes and data for the BEPAM model are contained in the "BEPAM_Supplementary Environment Policy Analysis.zip" (2) Simulation results from the BEPAM model are contained in "ModelOutputs.zip" under the "BEPAM_Supplementary Environment Policy Analysis.zip"

Miscanthus x giganteus (Mxg) is a promising perennial crop for producing natural colorants, renewable fuels, and bioproducts. However, natural recalcitrance and high pretreatment cost are major barriers to their complete conversion. In this study, a green processing method has been investigated for efficient recovery of natural pigments (anthocyanins), fermentable sugars, and pure lignin from Mxg genotypes using choline chloride-based natural deep eutectic solvents (NADES) systems. Interestingly, choline chloride: lactic acid (ChCl: LA) NADES-processed biomass resulted in 67.8 ± 2.1 μg g−1 of anthocyanins from dry biomass. A maximum of 87.4%–94.1% glucose yield was achieved after enzymatic saccharification. The effective extraction of lignin with high purity with higher β-aryl ether (βO4) bonds from advanced crops is crucial for lignin valorization. Notably, highly pure lignin (≈93.4% ± 1.4%) is achieved after low-temperature NADES pretreatment while retaining lignin’s native structure. 31P nuclear magnetic resonance demonstrated that total phenolics for ChCl: LA-lignin resulted in 1.20 mmol g−1 hydroxyls. The relative monolignol composition of syringyl (S), guaiacyl (G), and p-hydroxyphenyl (H) is 19.0, 65.7, and 14.3%, respectively, as evidenced by heteronuclear single quantum coherence analysis. This study provides a novel approach for obtaining high-purity lignin for catalytic depolymerization for oligomers and bifunctional monoaromatics production and leverages current cellulosic biorefinery technologies.

Transport and MFM data of brickwork artificial spin ice composed of permalloy are included, which are reproductions of the data in an article named "Magnetic response of brickwork artificial spin ice". Transport data represent magnetic response of connected brickwork artificial spin ice, and MFM data represent how both connected and disconnected brickwork artificial spin ice react to external magnetic fields. SEM images of typical samples are included, where individual nanowire leg (island) is approximately 660 nm long and 140 nm wide with a 40 nm thickness. For the transport, each sample was measured in a longitudinal and a transverse geometry. Red curves are the 2500 Oe to -2500 Oe sweeps and the blue curves are -2500 Oe to 2500 Oe sweeps. Transport measurements were taken by using a standard 4-wire technique. Each plot was saved in pdf format.

Golden Gate assembly is one of the most widely used DNA assembly methods due to its robustness and modularity. However, despite its popularity, the need for BsaI-free parts, the introduction of scars between junctions, as well as the lack of a comprehensive study on the linkers hinders its more widespread use. Here, we first developed a novel sequencing scheme to test the efficiency and specificity of 96 linkers of 4-bp length and experimentally verified these linkers and their effects on Golden Gate assembly efficiency and specificity. We then used this sequencing data to generate 200 distinct linker sets that can be used by the community to perform efficient Golden Gate assemblies of different sizes and complexity. We also present a single-pot scarless Golden Gate assembly and BsaI removal scheme and its accompanying assembly design software to perform point mutations and Golden Gate assembly. This assembly scheme enables scarless assembly without compromising efficiency by choosing optimized linkers near assembly junctions.

The oleaginous yeast Rhodosporidium toruloides is considered a promising candidate for production of chemicals and biofuels thanks to its ability to grow on lignocellulosic biomass, and its high production of lipids and carotenoids. However, efforts to engineer this organism are hindered by a lack of suitable genetic tools. Here we report the development of a CRISPR/Cas9 system for genome editing in R. toruloides based on a fusion 5S rRNA–tRNA promoter for guide RNA (gRNA) expression, capable of greater than 95% gene knockout for various genetic targets. Additionally, multiplexed double‐gene knockout mutants were obtained using this method with an efficiency of 78%. This tool can be used to accelerate future metabolic engineering work in this yeast.

Yarrowia lipolytica has been used to produce both citric acid and lipid-based bioproducts at high titers. In this study, we found that pH differentially affects citric acid and lipid production in Y. lipolytica W29, with citric acid production enhanced at more neutral pH’s and lipid production enhanced at more acid pH’s. To determine the mechanism governing this pH-dependent switch between citric acid and lipid production, we profiled gene expression at different pH’s and found that the relative expression of multiple transporters is increased at neutral pH. These results suggest that this pH-dependent switch is mediated at the level of citric acid transport rather than changes in the expression of the enzymes involved in citric acid and lipid metabolism. In further support of this mechanism, thermodynamic calculations suggest that citric acid secretion is more energetically favorable at neutral pH’s, assuming the fully protonated acid is the substrate for secretion. Collectively, these results provide new insights regarding citric acid and lipid production in Y. lipolytica and may offer new strategies for metabolic engineering and process design.

Microbial growth emerges from coordinated synthesis of various cellular components from limited resources. In Saccharomyces cerevisiae, cyclic AMP (cAMP)-mediated signaling is shown to orchestrate cellular metabolism; however, it remains unclear quantitatively how the controlling circuit drives resource partition and subsequently shapes biomass growth. Here we combined experiment with mathematical modeling to dissect the signaling-mediated growth optimization of S. cerevisiae. We showed that, through cAMP-mediated control, the organism achieves maximal or nearly maximal steady-state growth during the utilization of multiple tested substrates as well as under perturbations impairing glucose uptake. However, the optimal cAMP concentration varies across cases, suggesting that different modes of resource allocation are adopted for varied conditions. Under settings with nutrient alterations, S. cerevisiae tunes its cAMP level to dynamically reprogram itself to realize rapid adaptation. Moreover, to achieve growth maximization, cells employ additional regulatory systems such as the GCN2-mediated amino acid control. This study establishes a systematic understanding of global resource allocation in S. cerevisiae, providing insights into quantitative yeast physiology as well as metabolic strain engineering for biotechnological applications.

:Bioenergy crops have been known for their ability to produce biofuels and bioproducts. In this study, the product portfolio of recently developed transgenic sugarcane (oilcane) bagasse has been redefined for recovering natural pigments (anthocyanins), sugars, and vegetative lipids. The total anthocyanin content in oilcane bagasse has been estimated as 92.9 ± 18.9 µg/g of dried bagasse with cyanidin-3-glucoside (13.5 ± 18.9 µg per g of dried bagasse) as the most prominent anthocyanin present. More than 85 % (w/w) of the total anthocyanins were recovered from oilcane bagasse at a pretreatment temperature of 150 °C for 15 min. These conditions for the hydrothermal pretreatment also led to a 2-fold increase in the glucose yield upon the enzymatic saccharification of the pretreated bagasse. Further, a 1.5-fold enrichment of the vegetative lipids was demonstrated in the pretreated residue. Re-defining green biorefineries with multiple high-value products in a zero-waste approach is the need of the hour for attaining sustainability.

The coproduction of high-value anthocyanin extract in the cellulosic ethanol process would diversify the co-product market, increase revenue, and potentially improve the economics of the process. The high anthocyanin concentration in the cob and structural carbohydrates in residual stover make purple corn stover an attractive source for anthocyanin and ethanol coproduction. This study aimed to develop simulation models for processes integrating ethanol production and anthocyanin extraction using purple corn stover, to evaluate their techno-economic feasibility, and to compare their performance with the conventional ethanol production process using corn stover. The annual ethanol production for plants processing 2000 MT dry feedstock / day was 148.6 million L/year for the integrated processes compared with 222.6 million L/year for the conventional process. Anthocyanin production in the modified processes using dilute acid-based and water-based anthocyanin extraction processes was 1779 and 1099 MT/year, respectively. Capital investments for the integrated processes ($448.1 to $443.8 million) were higher than the conventional process ($371.9 million). Due to high revenue from anthocyanin extract, the ethanol production cost for the integrated process using acid-based anthocyanin extraction ($0.36/L) was 34.5% lower than conventional ethanol production ($0.55/L). The ethanol production cost for the integrated process using water-based anthocyanin extraction ($0.68/L) was higher than conventional ethanol production due to low ethanol and anthocyanin yields. The minimum ethanol selling price for the integrated process using acid-based anthocyanin extraction ($0.65/L) was also lower than the conventional process ($0.72/L), indicating an improvement in economic performance.

This dataset is provided to support the statements in Kim, H., and R.Y. Makhnenko. 2022. "Evaluation of CO2 sealing potential of heterogeneous Eau Claire shale". Journal of the Geological Society. In geologic carbon dioxide (CO2) storage in deep saline aquifers, buoyant CO2 tends to float upwards in the reservoirs overlaid by low permeable formations called caprocks. Caprocks should serve as barriers to potential CO2 leakage that can happen through a diffusion loss and permeation through faults, fractures, or pore spaces. The leakage through intact caprock would mainly depend on its permeability and CO2 breakthrough pressure, and is affected by the heterogeneities in the material. Here, we study the sealing potential of a caprock from Illinois Basin - Eau Claire shale, with sandy and shaly fractions distinguished via electron microscopy and grain/pore size and surface area characterization. The direct measurements of permeability of sandy shale provides the values ~ 10-15 m2, while clayey specimens are three orders of magnitude less permeable. The CO2 breakthrough pressure under in-situ stress conditions is 0.1 MPa for the sandy shale and 0.4 MPa for the clayey counterpart – these values are higher than those predicted by the porosimetry methods performed on the unconfined specimens. Sandy Eau Claire shale would allow penetration of large CO2 volumes at low overpressures, while the clayey formation can serve as a caprock in the absence of faults and fractures in it.

The requirement of in vitro tissue culture for the delivery of gene editing reagents limits the application of gene editing to commercially relevant varieties of many crop species. To overcome this bottleneck, plant RNA viruses have been deployed as versatile tools for in planta delivery of recombinant RNA. Viral delivery of single-guide RNAs (sgRNAs) to transgenic plants that stably express CRISPR-associated (Cas) endonuclease has been successfully used for targeted mutagenesis in several dicotyledonous and few monocotyledonous plants. Progress with this approach in monocotyledonous plants is limited so far by the availability of effective viral vectors. We engineered a set of foxtail mosaic virus (FoMV) and barley stripe mosaic virus (BSMV) vectors to deliver the fluorescent protein AmCyan to track viral infection and movement in Sorghum bicolor. We further used these viruses to deliver and express sgRNAs to Cas9 and Green Fluorescent Protein (GFP) expressing transgenic sorghum lines, targeting Phytoene desaturase (PDS), Magnesium-chelatase subunit I (MgCh), 4-hydroxy-3-methylbut-2-enyl diphosphate reductase, orthologs of maize Lemon white1 (Lw1) or GFP. The recombinant BSMV did neither infect sorghum nor deliver or express AmCyan and sgRNAs. In contrast, the recombinant FoMV systemically spread throughout sorghum plants and induced somatic mutations with frequencies reaching up to 60%. This mutagenesis led to visible phenotypic changes, demonstrating the potential of FoMV for in planta gene editing and functional genomics studies in sorghum.

The dataset consists of two types of data: the estimate of land productivity (the maximum productivity, MP) and the estimate of land that has low productivity for any major crops planted in the Contiguous United States and then may be available for growing bioenergy crops (the marginal land, ML). All data items are in GeoTiff format, under the World Geodetic System (WGS) 84 project, and with a resolution of 0.0020810045 degree (~250 m). The MP values are calculated based on machine learning model estimated yields of major crops in the CONUS, and its expected value (MP_mean.tif), and associated uncertainty (MP_IDP.tif). The ML availability data have two versions: a deterministic version and a version with uncertainty. The deterministic MLs are determined as the land pixels with expected MP values falling in the range defined in the following criteria, and the MLs with uncertainty are determined as the probability that the MP value of a land pixel falls in the range defined in the following criteria: Criteria_____Description S1________ Current crop and pasture land with MP <= P50 S2________ Current crop and pasture land with MP <= P25 S3________ S1 + current grass and shrub land with P25 < MP < P50 S4________ S2 + current grass and shrub land with P10 < MP < P25 Economic__ Current crop and pasture land with potential profitability < 0 Here P10, P25 and P50 are the 10th, 25th and 50th percentile of crop MP values

The recalcitrance of lignocellulosic biomass necessitates an efficient pretreatment protocol for operating a successful cellulosic biorefinery. It is critical to improve cellulose accessibility for hydrolysis and fermentation by altering the plant cell wall’s physical structure and chemical composition. Sequential hydrothermal-mechanical refining pretreatment (HMR) allows efficient recovery of cellulosic sugars without utilizing any hazardous chemicals. HMR has been successfully applied to Liberty switchgrass, a bioenergy cultivar released by the USDA, and now it is being applied to oilcane, a recently developed transgenic sugarcane variety engineered to accumulate lipids in its vegetative tissues. Sugar yields of oilcane bagasse (OCB) and switchgrass (SG) treated with HMR are 96.4% and 75.4%, respectively. This study sought to correlate cellulosic sugar yields with structural changes within the cell wall caused by HMR on two distinct bioenergy crops. Simon’s staining technique for the specific surface area analysis showed that HMR increased the specific surface area of pretreated biomass residues by 80-112%. In addition, ATR-FTIR was performed to determine the effects of HMR on physical structures based on the total crystallinity index (TCI) and hydrogen bonding intensity (HBI). Irrespective of biomass type, HMR decreased the initial crystalline cellulose contents of untreated biomass residues by 3.5% and reduced TCI and HBI by 7-13%. The study found that sugar yields were negatively correlated to reducing values of hydrogen bonding intensity, crystalline cellulose content, and total crystallinity index.