Dataset Search

This datasets provide basis of our analysis in the paper - Revising the Ozone Depletion Potentials for Short-Lived Chemicals such as CF3I and CH3I. All datasets here are from the model output (CAM4-chem). All the simulations (background and perturbation) were run to steady-state and only the last year outputs used in analysis are archived here.

Data and code supporting the paper titled "Leveraging electric vehicles as a resiliency solution for residential backup power during outages" by Shanshan Liu, Alex Vlachokostas, and Eleftheria Kontou. The data and the code enable spatiotemporal analytics and assessment of electric vehicle charging demand, remaining driving range, residential energy use, and vehicle-to-home (V2H) energy system resilience metrics.

Model output dataset (6-hourly) from the Weather Research and Forecasting (WRF) model simulations over South America with the added capability of water vapor tracers to track the moisture that originates over the Amazon and the La Plata river basins. The simulations were performed for the period 2003-2013 at 20-km horizontal resolution fully coupled with the Noah-MP land surface model. Limited number of original output variables sufficient for reproducing the analyses in papers that cite this dataset are included here. The attached wrfout_southamerica_readme.txt contains detailed information about the file format and variables. For the complete model dataset, contact francina@illinois.edu.

Simulation data used to generate plots in the associated paper ("Strain rate controls alignment in growing bacterial monolayers").

Enclosed in this dataset are transport data of kagome connected artificial spin ice networks composed of permalloy nanowires. The data herein are reproductions of the data seen in Appendix B of the dissertation titled "Magnetotransport of Connected Artificial Spin Ice". Field sweeps with the magnetic field applied in-plane were performed in 5 degree increments for armchair orientation kagome artificial spin ice and zigzag orientation kagome artificial spin ice.

Agriculture is the largest user of water in the United States. Yet, we do not understand the spatially resolved sources of irrigation water use by crop. The goal of this study is to estimate crop-specific irrigation water use from surface water withdrawals, total groundwater withdrawals, and nonrenewable groundwater depletion for the Continental United States. Water use by source is provided for 20 crops and crop groups from 2008 to 2020 at the county spatial resolution. These results present the first national-scale assessment of irrigation by crop, county, water source, and year. In total, there are nearly 2.5 million data points in this dataset (3,142 counties; 13 years; 3 water sources; and 20 crops). This dataset supports the paper by Ruess et al (2023) in Water Resources Research, https://doi.org/10.1029/2022WR032804. When using, please cite as: Ruess, P.J., Konar, M., Wanders, N. , & Bierkens, M. (2023). Irrigation by crop in the Continental United States from 2008 to 2020, Water Resources Research, 59, e2022WR032804. https://doi.org/10.1029/2022WR032804

Data accompanying the article "Physics of Unraveling and Micromechanics of Hagfish Threads". Abstract of the article: Hagfish slime is a unique biological material composed of mucus and protein threads that rapidly deploy into a cohesive network when deployed in seawater. The forces involved in thread deployment and interactions among mucus and threads are key to understanding how hagfish slime rapidly assembles into a cohesive, functional network. Despite extensive interest in its biophysical properties, the mechanical forces governing thread deployment and interaction remain poorly quantified. Here, we present the first direct in situ measurements of the micromechanical forces involved in hagfish slime formation, including mucus mechanical properties, skein peeling force, thread–mucus adhesion, and thread–thread cohesion. Using a custom glass-rod force sensing system, we show that thread deployment initiates when peeling forces exceed a threshold of approximately 6.8 nN. To understand the flow strength required for unraveling, we used a rheo-optic setup to impose controlled shear flow, enabling us to directly observe unraveling dynamics and determine the critical shear rate for unraveling of the skeins, which we then interpreted using an updated peeling-based force balance model. Our results reveal that thread–mucus adhesion dominates over thread–thread adhesion and that deployed threads contribute minimally to bulk shear rheology at constant flow rate. These findings clarify the physics underlying the rapid, flow-triggered assembly of hagfish slime and inform future designs of synthetic deployable fiber–gel systems.

Data for "Generic character of charge and spin density waves in superconducting cuprates". - Neutron scattering data for SDW - RSXS scans of CDW of LESCO x=0.10, 0.125, 0.15, 0.17, 0.20 at various temperatures. - Temperature dependence of CDW peak intensity, correlation length, Qcdw (Lorentzian fit, S(q,T) fit, Landau-Ginzburg fit) - XAS data of LESCO x=0.10, 0.125, 0.15, 0.17, 0.20

This dataset provides the raw data, code and related figures for the paper, "Anomalous Spin-Orbit Torques in Magnetic Single-Layer Films."

This dataset consists of all the figure files that are part of the main text and supplementary of the manuscript titled "Optical manipulation of the charge density wave state in RbV3Sb5". For detailed information on the individual files refer to the readme file.

These data are for two companion papers on use of LSPIV obtained from UAS (i.e. drones) to measure flow structure in streams. The LSPIV1 folder contains spreadsheet data used in each case referred to in Table 1 in the manuscript. In the spreadsheets, there is a cell that denotes which figure was constructed with which data. The LSPIV2 folder contains spreadsheets with data used for the constructed figures, and are labeled by figure.

This data set includes all of data related to strain-resilient FETs based on 2D heterostructures including optical images of FETs, Raman characteristics data, Transport measurement data, and AFM topography data.

This dataset is the numerical simulation data of the computational study of the cold front-related hydrodynamics in the Wax Lake delta. The numerical model used is ECOM-si.

A 3D CNN method to land cover classification using LiDAR and multitemporal imagery

This dataset includes both meteorology and oceanography data collected at stations (CSI03, CSI06, and CSI09) near the Gulf of Mexico from the LSU WAVCIS (Waves-Current-Surge Information System) lab. The associated data analysis visualization is also saved in separate directories.

This dataset is the field measurements of water depth at the Wax Lake delta conducted in late 2012.

This dataset is the field measurements of currents at two stations (Big Hogs Bayou and Delta1) in the the Wax Lake delta in November 2012 and February 2013.

This dataset includes data of the the Wax Lake delta from four public agencies: NGDC, USGS, NDBC, and NOAA CO-OPS. Besides the original data, the processed data associated with analyzed figures are also shared.

Optical, AFM, and PFM image of α-In2Se3; Short-circuit current and open circuit voltage maps, I-V curve for different intensities; Dependence of the short-circuit current density, open-circuit voltage, depolarization field, and efficiency on intensity and thickness; Benchmarking the performance.

Per the authors' request, the data files for this dataset are now suppressed. Please visit this new dataset for the complete and updated data files: Huang, Yijing; Fahad , Mahmood (2025): Data for Observation of a Magneto-chiral Instability in Photoexcited Tellurium. University of Illinois Urbana-Champaign.<a href="https://doi.org/10.13012/B2IDB-1409842_V1">https://doi.org/10.13012/B2IDB-1409842_V1</a> ==================== The data and code provided in this dataset can be used to generate key plots in the manuscript. It is divided into four subfolders (B parallel/perpendicular to the tellurium c axis and field/ temperature dependence), each containing the raw data (saved in .mat format), the oscillator parameters obtained through linear prediction (saved in .mat format), and the plot-generating code (.m files). The code was written using MATLAB R2024a. To run the code, go to each folder, and run the .m file in that folder, which generates two plots.